WATER QUALITY ANALYSIS ON DRINKING WATER NETWORKS

Drinking water analysis is essential to guarantee pure, healthy water for distribution to users. Thanks to our I-CENSE™ probe, chlorine measurements ensure water disinfection while limiting chlorine to avoid the creation of its toxic compounds.

With correct network meshing, the I-CENSE™ probe also detects possible leaks in the network and identifies the area to be repaired with its pressure and flow measurements.

In addition, by measuring the turbidity of the water, this makes it possible to guarantee clear, limpid water to the consumer or to act quickly if this is not the case.

Lastly, measuring conductivity makes it possible to identify the source of the water or the mixture from which it comes, depending on the network to be monitored.

FOR PURE WATER AT THE TAP: MONITORING WATER QUALITY IN DRINKING WATER NETWORKS



LEAK DETECTION



CHLORINE DISINFECTION MONITORING



WATER CHARACTERISATION

FOR PURE WATER AT THE TAP

Measurement ranges

Free chlorine: 0 to 5 mg/l (accuracy: ± 0.05 mg/l or 0.5 %)
Turbidity: 0 to 50 NTU: ± 0.05 NTU
Conductivity: 0 to 2000 µS (accuracy: 0.5% of reading or ± 5 µS)
Absorbance UV 254 < 0,1 absorbance/cm unit

Multi-parameter measurement probe

In addition to these measurements, the UV254+ probe can check the organic load in drinking water.

In short, our products can be used to secure drinking water distribution, monitor biological contamination, control disinfection, sectorize potential leakage areas and guarantee network assets.

DO YOU HAVE A PROJECT ? CONTACT US!